The hydraulic press will generate a lot of heat during long-term operation. If the heat removal is not good, it will cause high oil temperature in the automobile oil tank and endanger production and processing. At this moment, it is necessary to install a cooling tower in the hydraulic transmission system to discharge heat. What are the assembly methods and characteristics of the cooling tower?
The cooling tower is generally assembled in the oil return pipeline or low-voltage pipeline. If necessary, it can also be installed at the oil outlet of the hydraulic oil pump to form a separate refrigeration control circuit. Details are as follows:
1. The cooling tower is installed at the overflow port of the main speed regulating valve. This type of installation is characterized by:; The rolling oil caused by the speed regulating valve can be cooled immediately, and at the same time, it will not be harmed by the impact working pressure of the system software. This product has a protective effect. The stop valve can make the hydraulic oil return to the automobile oil tank immediately during operation.
2. The refrigeration is installed on the main oil return road. This type of installation is characterized by:; The cooling tower is immediately installed on the main oil return road, with faster cooling speed, but when the system software control circuit has impact working pressure, it is specified that the cooling tower can bear higher working pressure.
3. Separate refrigeration control circuit. Some of the separate refrigeration control circuits are; The independent hydraulic oil pump will enter the hot working substances into the cooling tower, and the cooling tower will not be harmed by the impact of the hydraulic press.
In addition, the customer is reminded that when selecting the cooling tower of the hydraulic press, it is necessary to select the cooling tower with very good heat removal effect, sufficient compressive strength, parallel hydraulic press and easy to operate the hydraulic oil to maintain constant temperature and humidity, so as to have heat removal effect faster.
Disclaimer: some content pictures of this site come from the Internet. If there is infringement, please contact the administrator to delete it as soon as possible. Thank you!
86-0572-2698886
Address: No. 299, Shanyou Road, Huzhou City, Zhejiang Province
Email: syrim163@163.com
Contact: + 86 13185298088 manager Shen