Hydraulic press is a kind of intelligent production equipment of mechatronics, which is widely used in our daily life. How to use and maintain it correctly is the main method to increase its service life and improve the effect of economic development. The selection of hydraulic oil affects the stability of the hydraulic transmission system of the hydraulic press. The selection of anti-wear hydraulic oil can make the hydraulic press stronger. This kind of hydraulic oil can

Making the hydraulic transmission system of the hydraulic press stable, reducing the harm of temperature to viscosity, and improving the wear resistance and corrosion resistance of the system software are beneficial to the reliable work of the pump and hydraulic solenoid valve.

The operator must carefully read and understand the commodity operation guide of hydraulic press without exception, have an in-depth understanding of the mechanical, electrical and hydraulic basic principles of hydraulic press, and have an in-depth understanding of the installation, commissioning, actual operation, maintenance and overhaul of hydraulic press, and be allowed to actually operate the hydraulic press after learning and training in actual operation and professional evaluation

When common faults occur in the hydraulic transmission system (such as abnormal posture, unstable steam pressure, too low steam pressure, system software vibration, high oil temperature, etc.), analyze the causes immediately and detect the faults. It is not allowed to cause major safety accidents when the equipment is working with faults

10 shall be selected when filling the oil tank of hydraulic compressor automobile μ M filtering system, it is definitely not allowed to drip oil immediately without filtering system. This equipment is equipped with return oil filtration and independent filtration refrigeration system, and the filtration precision is 10 μ m。 In order to clean the hydraulic oil and reduce common faults, it is necessary for the filter device to have 4 filter elements a year under normal conditions.

In order to ensure the normal operation of the hydraulic press household appliance system software, it is necessary to ensure the stability of the working voltage, and its change value shall not be higher than or less than 5-10% of the rated current; The doors or covers of machinery and equipment must be closed or tightly covered during equipment operation. It is forbidden to open the application to prevent dirt accumulation; Pay attention to the characteristics of the accumulator. If it is found that the working pressure of air injection is insufficient or the rubber is damaged, it shall be handled properly.

Regularly maintain and tighten the tee joint of the hydraulic press on time to prevent loosening and oil leakage. The operator is forbidden to disassemble all hydraulic systems without authorization. In case of common faults, the professional technicians of equipment maintenance shall immediately carry out maintenance on the fault detection of machinery and equipment.